Filter
Top Products
118 en | Common User Commands (unlocked) AutoDome Easy II IP
F.01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc.
14 Common User Commands (unlocked)
This chapter details the commonly used Bosch keyboard setup
commands. See Section 15 Keyboard Commands by Number,
page 122, for a complete list of commands.
14.1 Setting AutoPan Mode
AutoPan mode pans the AutoDome Easy II camera 360º or pans
between user defined limits (when programmed). The
AutoDome Easy II camera continues to pan until stopped by
moving the joystick.
To pan 360º:
1. Press ON-1-ENTER.
2. Move the joystick to stop the pan.
To set left and right pan limits:
1. Move the camera to the starting position and press SET-
101-ENTER to set the left limit.
2. Move the camera to the end position and press SET-102-
ENTER to set the right limit.
To start AutoPan between limits:
1. Press ON-2-ENTER.
2. Move the joystick to stop the pan.