Filter
Top Products
AutoDome Easy II IP Using the AutoDome Easy II IP | en 77
Bosch Security Systems, Inc. Installation Manual F.01U.164.576 | 2.0 | 2010.03
11.3 Connecting the AutoDome Easy II IP to the
PC
1. Install the AutoDome Easy II IP according to the
instructions in this manual.
2. Connect an Ethernet cable from the AutoDome Easy II IP
RJ45 connector to a dedicated network switch to bypass
the Local Area Network (LAN).
3. Connect the dedicated network switch to the RJ45
connector on the PC (see option A below).
Figure 11.1 AutoDome Easy II IP System Configuration
NOTICE!
The AutoDome Easy II IP can also be connected directly to a PC
using an Ethernet crossover cable with RJ45 connectors (see
option B below).
1 AutoDome Easy II IP
2 IP Connection
3 Network Switch
4Computer