Filter
Top Products
116 en | On-Screen Display Menu Navigation AutoDome Easy II IP
F.01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc.
BIST Enters the Perform Built-in Self
Tests menu. If confirmed, the
BIST tests start and the results
are displayed.
YES to start test. NO to
exit the menu.
Typical results displayed
as follows:
BIST
Exit...
Data Flash: PASS
FPGA: PASS
Bilinx: PASS
Homing: PASS
Fan Speed: PASS
Internal
Temp.
Displays the current dome temperature.
High Temp
Events
Displays the number of times the high temperature
threshold is exceeded.
Highest Temp Displays the highest temperature reached.
Low Temp
Events
Displays the number of times the low temperature
threshold is exceeded.
Lowest Temp Displays the lowest temperature reached.
Security
Access
Displays the number of times the locked-command menu
is unlocked.
CTFID Access Displays the number of times the Configuration Tool is
accessed.
Homing
Events
Displays the number of times the AutoDome Easy II was
rebooted.
Homing Failed Displays the number of times the AutoDome Easy II failed
to home properly.
Loss Home
Events:
Displays the number of times the AutoDome Easy II lost
the home position.
Restart
Events
Displays the number of restart events.
Power Up
Events
Displays the number of power-up events.
Menu Description Sub-menu / Description