Filter
Top Products
AutoDome Easy II IP Using the AutoDome Easy II IP | en 83
Bosch Security Systems, Inc. Installation Manual F.01U.164.576 | 2.0 | 2010.03
Aux Control Tab
The Aux Control tab is used to enter pre-programmed keyboard
control commands. See Section 15 Keyboard Commands by
Number, page 122, for a list of all commands. To access the Aux
Control tab, navigate to the Livepage and click the Aux Control
tab (see Figure 11.2 below).
Figure 11.2 Aux Control Tab
NOTICE!
The Aux Control tab can also be used to display the OSD
menus. Once the OSD menus are displayed, the virtual joystick
in the View Control tab can be used to navigate the menus, and
the Focus and Iris buttons can be used to make menu
selections.
1 Command number field
2 Keypad (numbers 0-9)
3 Show a preset shot
4 Set a preset shot
5 Initiates a command
6 Deletes a number in the Command Number field
7 Used to select a menu item
8 Stops a command