Filter
Top Products
74 en | Using the AutoDome Easy II IP AutoDome Easy II IP
F.01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc.
11 Using the AutoDome Easy II IP
The AutoDome Easy II IP transmits PTZ control commands and
images over a TCP/IP network. It also allows users to configure
the camera display settings, camera operating settings, and to
configure the network parameters.
The IP unit incorporates a network video server in the IP
module. The primary function of the server is to encode video
and control data for transmission over a TCP/IP network. With
its H.264 encoding, it is ideally suited for IP communication and
for remote access to digital video recorders and multiplexers.
The use of existing networks means that integration with CCTV
systems or local networks can be achieved quickly and easily.
Video images from a single camera can be simultaneously
received on several receivers.
Refer to Section 18 BVIP Firmware Updates, page 132, for
firmware upgrade instructions.