Filter
Top Products
92 en | On-Screen Display Menu Navigation AutoDome Easy II IP
F.01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc.
13 On-Screen Display Menu Navigation
The AutoDome Easy II is programmed through the on-screen
display (OSD) menus. To access the OSD menus, you must
open the main Setup Menu.
Menu items marked with an asterisk (*) are default settings,
unless otherwise noted.
Menu Navigation using an AutoDome Easy II IP
To navigate the OSD menus using an AutoDome Easy II IP,
access the Aux Control tab on the Livepage to enter the
appropriate Aux commands. Once an OSD menu is active,
return to the View Control tab to move through the menu and to
make selections.
13.1 Setup Menu
The main Setup Menu provides access to all programmable
AutoDome Easy II settings. It is a locked menu that requires the
user to turn off the command lock.
To open the main Setup Menu (locked command):
1. Press OFF-90-ENTER to turn off the command lock.
2. Press ON-46-ENTER to access the Main Menu.
3. Use the joystick to highlight a menu item.
4. Press Focus/Iris to open a menu.
5. Follow the on-screen instructions.
NOTICE!
After a period of 4.5 minutes of inactivity, a menu times-out and
exits without warning. Some unsaved settings in the current
menu can be lost.
NOTICE! The AutoDome Easy II displays only those menus
applicable to the AutoDome Easy II Series configuration. Use
the joystick to navigate through the menu and the Focus/Iris
keys to make a selection.
Time Saver Tip: Scrolling through menus can be time
consuming; to quickly return to “exit” prompt, just twist the
joystick or use the zoom in feature.