Filter
Top Products
AutoDome Easy II IP Installing a Recessed Mount | en 45
Bosch Security Systems, Inc. Installation Manual F.01U.164.576 | 2.0 | 2010.03
6.1.2 Preparing the Ceiling for Installation
To mount to a recess mount, do the following:
1. Determine a secure location for the recessed mount
(supplied separately).
Figure 6.1 Recess Mount Dimensions
2. Drill or cut a 7 in. hole with a tolerance of +/- 1/8 in.
(177.8 mm +/- 2.2 mm).
3. Optional: if installing the AutoDome Easy II to a suspended
ceiling tile or any other surface where additional support is
required, the LTC 9349MK mounting kit is recommended
(supplied separately). See the instruction book supplied
with the mounting bracket for installation instructions.
68.7
(2.7)
194.0
(7.64)
96.0
(3.8)