Filter
Top Products
AutoDome Easy II IP Alarms and Relay Connections | en 71
Bosch Security Systems, Inc. Installation Manual F.01U.164.576 | 2.0 | 2010.03
9.2.2 Connecting a Normally Closed Alarm
1. Connect the alarm to the appropriate input (1 through 2)
and ground at the AutoDome Easy II.
Figure 9.3 N.C. Normally Closed Connections
2. From the AutoDome Easy II main menu select Alarm
Setup>Inputs Setup, and set Alarm Input # to N.C. See the
table below for contact and condition details.
Ref. # User Contact Dome Color
1 Normally
Closed
Alarm In 1 or Alarm In 2
(Ref. #3)
Brown IN 1 or
Orange IN 2
2 Common Ground (Ref. #4) Green
AutoDome Easy II Programmed N.C.
Circuit Alarm Indication
Open Alarm
Closed Normal