Filter
Top Products
AutoDome Easy II IP Installing a Recessed Mount | en 47
Bosch Security Systems, Inc. Installation Manual F.01U.164.576 | 2.0 | 2010.03
6. For AutoDome Easy II IP models: Adjust the clamping
plate so that the bracket with plate is in the upper
position.
a. Loosen the two screws (position 1) on each side of
the clamping plate.
b. Move the screws to the upper position (position 2)
and tighten.
7. Insert mount through the hole and into the ceiling. Slide
clamps out and down so that the drywall is clamped in
between the clamps and the bracket flange (41.7 mm
(1.64 in.) maximum ceiling thickness and 12.7 mm
(0.50 in.) minimum ceiling thickness).
8. Tighten both clamps to the ceiling using supplied screws
and a #2 Phillips screwdriver.
Figure 6.4 Tighten Mounting Clamps