Filter
Top Products
AutoDome Easy II IP Using the AutoDome Easy II IP | en 81
Bosch Security Systems, Inc. Installation Manual F.01U.164.576 | 2.0 | 2010.03
1. To control a peripheral, click the appropriate controls.
2. Move the mouse cursor over the video image. Additional
options for controlling peripherals are displayed with the
mouse cursor.
3. To manually pan throughout the image area, move your
cursor over any part of the live video. The image area
displays a directional arrow (), then click and
hold the right mouse key to pan the camera.
Digital I/O
There are three alarm icons: two for alarm rules (rules 1 and 2,
respectively) and one for the alarm relay. The alarm icon is for
information purposes and indicates the status of an alarm
input: when an alarm is triggered, the icon lights up blue. The
device’s alarm connections and alarm rule settings determine if
the alarm icons are activated.
Triggering Relay
External units can be activated using the relay in the device (for
example lights or door openers).
To activate this, click the icon for the relay next to the
video image. The icon will be red when the relay is
activated.