Filter
Top Products
3 Selecting AI Servo AF CharacteristicsN
116
You can manually adjust each case’s three parameters: 1. Tracking
sensitivity, 2. Acceleration/deceleration tracking, and 3. AF point auto
switching.
1
Select a case.
Turn the <5> dial to select the icon
of the case you want to adjust.
2
Press the <c> button.
The selected parameter will have a
purple frame.
3
Select the parameter to adjust.
Select the parameter to adjust, then
press <0>.
When Tracking sensitivity is selected,
the setting screen will appear.
4
Make the adjustment.
Adjust the setting, then press <0>.
X The adjustment is saved.
The default setting is indicated by the
light gray [C] mark.
To return to the screen in step 1,
press the <c> button.
Changing Cases’ Parameter Settings
In step 2, if you press the <c> button and then press the <L>
button, you can revert the 1, 2 and 3 parameter settings above for each
case.
You can also register the 1, 2, and 3 parameter settings to My Menu
(p.459). Doing so will change the selected case’s settings.
When shooting with a case whose parameters you adjusted, select the
adjusted case and then take the picture.