Filter
Top Products
3 Customizing AF FunctionsN
128
EOS iTR* AF executes autofocus by recognizing faces and subject
colors. EOS iTR AF works when the AF area selection mode is set to
Zone AF (manual selection of zone), Large Zone AF (manual selection
of zone), or 65-point automatic selection AF.
* intelligent Tracking and Recognition: The metering sensor recognizes the
subject and the AF points track it.
ON: Enable
The AF point is automatically
selected based not only on AF
information, but also faces and other
details.
In AI Servo AF mode, the camera remembers the color at the position
it focused on first, then continues to track and focus the subject by
switching AF points to track that color. This makes it easier to keep
track of the subject than when only AF information is available.
In One-Shot AF mode, EOS iTR AF makes focusing on people
easier, so you can prioritize composition.
OFF: Disable
AF points are automatically selected based only on AF information.
(The AF will not use information based on faces, subject colors and
other details.)
Auto AF point selection: EOS iTR AF
If [Enable] is set, the camera will take longer to focus than when
[Disable] is set.
When EOS iTR AF is operating, maximum continuous shooting speed
with <
o> set will be approx. 9.5 shots/sec. Also, under low-light
conditions, the continuous shooting speed may decrease.
Even if you set [Enable], expected result may not be obtained depending
on the shooting conditions and subject.
Under light so low that the flash emits the AF-assist beam automatically,
AF points are selected automatically based only on AF information.
Face detection may not work if the face is small or under low-light
conditions.