Canon 9128B016 Digital Camera User Manual


 
434
Under the [8] tab, you can customize
various camera features to suit your
picture-taking preferences. Any settings
different from the default will be
displayed in blue.
3 Setting Custom FunctionsN
C.Fn1: Exposure
Exposure level increments
1/3:1/3-stop
1/2:1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. This is effective when
you prefer to control the exposure in less fine increments than 1/3-stop.
ISO speed setting increments
1/3: 1/3-stop
1/1: 1-stop
Bracketing auto cancel
ON: Enable
When you set the power switch to <
2
>, the AEB and white balance
bracketing settings will be canceled. AEB will also be canceled when
the flash is ready to fire or if you switch to movie shooting.
OFF: Disable
The AEB and white balance bracketing settings will not be canceled even if you set
the power switch to <
2
>. (If the flash is ready to fire or if you switch to movie
shooting, AEB will be canceled temporarily, but the AEB range will be retained.)
When [1/2-stop] is set, the exposure level will be displayed as shown below.
Even when [1-stop] is set, you can set ISO 16000.