Filter
Top Products
k Shooting Movies
324
You can display the electronic level by pressing the <
B
> button (p.75).
Note that if the AF method is set to [u +Tracking] or the camera is
connected to a TV set with an HDMI cable (p.385), the electronic level
cannot be displayed.
The electronic level cannot be displayed during movie shooting. (The
electronic level will disappear when you start shooting a movie.)
When movie shooting starts, the movie shooting remaining time will
change to the elapsed time.
Cautions for Movie Shooting
Do not point the camera toward an intense light source, such as the sun
on a sunny day or an intense artificial light source. Doing so may
damage the image sensor or the camera’s internal components.
Under [51: Record func+card/folder sel.], even if [Record func.] is set
to [Rec. to multiple] (p.147), the movie cannot be recorded to both the
CF card [f] and SD card [g]. If [Rec. separately] or [Rec. to multiple]
is set, the movie will be recorded to the card which is set for [Playback].
If <Q> is set and the ISO speed or aperture changes during movie
shooting, the white balance may also change.
If you shoot a movie under fluorescent or LED lighting, the movie may
flicker.
Zooming the lens during movie shooting is not recommended. Zooming
the lens may cause changes in the exposure to be recorded regardless
of whether the lens’s maximum aperture changes or not.
During movie shooting, you cannot magnify the image even if you press
the <u> button.
Be careful not to cover the built-in microphone (p.314) with your finger,
etc.
[Multi Shot Noise Reduction] (p.176) and [Distortion] (p.182) cannot
be set. (They will not function.)
If you connect or disconnect the HDMI cable during movie shooting, the
movie shooting will end.
General Movie Shooting Cautions are on pages 351-352.
If necessary, also read General Live View Shooting Cautions on
pages 310-311.