Filter
Top Products
427
d Transferring Images to a Computer
Sel.Image
1
Select [Image transfer].
Under the [32] tab, select [Image
transfer], then press <0>.
2
Select [Image sel./transfer].
3
Select [Sel.Image].
4
Select the images to be
transferred.
Turn the <5> dial to select the
image to be transferred, then press
<0>.
Turn the <
5
> dial to display the [
X
] on
the screen’s upper left, then press <
0
>.
If you press the <
u
> button and turn
the <
6
> dial counterclockwise, you
can select an image from a three-image
display. To return to the single-image
display, turn the <
6
> dial clockwise.
To select other images to be
transferred, repeat step 4.
3 Selecting the Images to be Transferred
When [Sel.Image] is selected, you can check the image’s transfer status
on the upper left of the screen: No mark: Not selected. X: Selected for
transfer. l: Transfer failed. k: Transfer succeeded.
The procedures for [RAW+JPEG transfer] (p.426) and above steps 1 to
4 can also be performed while the camera is not connected to a
computer.