Filter
Top Products
3 Menu Function Settings
348
V button function
You can set the functions performed by pressing the shutter button
halfway or completely during movie shooting.
If [ /k] or [q/k] is set, besides pressing the <0> button,
you can start/stop the movie shooting by pressing the shutter button
completely or by using Remote Switch RS-80N3 or Timer Remote
Controller TC-80N3 (both sold separately, p.248). However, with
[ /k] or [q/k] set, still photo shooting (p.327) is not possible.
HDMI output + LCD
This is for recording an HDMI movie to an external recording device.
The default setting is [No mirroring].
[No mirroring]
• When HDMI output starts, the camera’s LCD monitor turns off.
•
Shooting information, AF point, and other details are overlaid on the
HDMI output movie. However, while viewing an external monitor
connected to an external recording device, you can press the
<
B
> button to switch to output without any information overlay.
• If you do not connect the HDMI output to an external device and
only view the output on the camera’s LCD monitor, you cannot
make the settings for output without an information overlay even
by pressing the <B> button.
• When recording a movie without an information overlay, use an
external monitor to confirm that the shooting information, AF point,
and other details are not displayed (confirm that the movie is
output without an information overlay) before recording.
Setting Pressed Halfway Pressed Completely
/z
Metering and AF Still photo shooting
q/z
Metering only Still photo shooting
/k
Metering and AF Starts/stops movie shooting
q/k
Metering only Starts/stops movie shooting
During movie shooting, the [V button function] setting overrides any
function assigned to the shutter button with [83: Custom Controls].