Filter
Top Products
P Multiple ExposuresN
242
With multiple exposures, the more exposures there are, the more
noticeable the noise, irregular colors, and banding will be. Also, as noise
increases with higher ISO speeds, shooting at low ISO speeds is
recommended.
If [Additive] is set, the image processing after taking the multiple
exposures will take time. (The access lamp will light up for longer than
usual.)
If you perform Live View shooting while [On:Func/Ctrl] and [Additive]
are both set, the Live View function will stop automatically when the
multiple-exposure shooting ends.
In step 9, the brightness and noise of the multiple-exposure image
displayed during Live View shooting will be different from the final
multiple-exposure image recorded.
If [On:ContShtng] is set, let go of the shutter button after shooting the
set number of exposures.
If the power switch is set to <2>, the battery is replaced, or if you
switch to movie shooting, multiple-exposure shooting will be canceled.
If you switch the shooting mode to <A> or <w/x/y> while shooting,
multiple-exposure shooting will end.
If you connect the camera to a computer or printer, multiple-exposure
shooting will not be possible. If you connect the camera to a computer or
printer during shooting, multiple-exposure shooting will stop.