Filter
Top Products
81
A Fully Automatic Shooting (Scene Intelligent Auto)
4
Take the picture.
Press the shutter button completely to
take the picture.
X The captured image will be displayed
for 2 sec. on the LCD monitor.
After you finish shooting, push down
the built-in flash with your fingers.
The focus indicator <o> blinks and focus is not achieved.
Aim the Area AF frame over an area with good contrast, then press
the shutter button halfway (p.55). If you are too close to the subject,
move away and try again.
When focus is achieved, the AF points do not light up in red.
The AF points light up in red in low-light conditions.
Multiple AF points light up simultaneously.
Focus has been achieved at all those points. As long as the AF point
covering the desired subject lights up, you can take the picture.
The beeper continues to beep softly. (The focus indicator <o>
does not light up.)
It indicates that the camera is focusing continuously on a moving
subject. (The focus indicator <o> does not light up.) You can take
sharp pictures of a moving subject.
Note that focus lock (p.83) will not work in this case.
FAQ
The <A> mode makes the colors look more impressive in nature, outdoor,
and sunset scenes. If you did not obtain the desired color tones, change the
mode to <d>, <s>, <f>, or <a>, set a Picture Style other than
<D>, then shoot again (p.160).