Filter
Top Products
97
AF Area Selection ModesN
The AF area is divided into three focusing zones (left, center, and right)
for focusing. Since the focusing area is larger than with Zone AF, it is
superior in focusing on the subject. Since auto selection AF is used, it is
superior to single-point AF or AF point expansion in achieving focus,
making it effective for moving subjects.
However, since it is inclined to focus on the nearest subject, focusing on
a specific target may be more difficult than with single-point AF.
The AF point(s) achieving focus is displayed as <S>.
The Area AF frame (entire AF area) is used to focus. This mode is set
automatically in the <A> mode.
With One-Shot AF, pressing the shutter button
halfway will display the AF point(s) <S> that
achieved focus. If multiple AF points are displayed,
it means they all have achieved focus. This mode
tends to focus on the nearest subject.
With AI Servo AF, you can set the AI Servo AF’s
starting position with [Initial AF pt, AI Servo
AF] (p.127). As long as the Area AF frame can
track the subject during shooting, focusing will
continue.
The AF point(s) achieving focus is displayed as
<S>.
Large Zone AF (Manual selection of zone)
65-point automatic selection AF