Filter
Top Products
Troubleshooting Guide
502
If you use a flash unit other than an EX-series Speedlite, the flash will
always be fired at full output (p.260).
When the external Speedlite’s Custom Function setting for [Flash
metering mode] is set to [TTL flash metering] (autoflash), the flash
will always be fired at full output (p.271).
If flash exposure compensation is already set with the external
Speedlite, flash exposure compensation cannot be set with the camera.
When the external Speedlite’s flash exposure compensation is canceled
(set to 0), flash exposure compensation can be set with the camera.
Under [z1: Flash control], set [Flash sync. speed in Av mode] to
[Auto] (p.263).
When the camera’s internal components slightly move, a small sound
may be heard.
If you use flash, the shutter will make two sounds each time you shoot (p.287).
It indicates that the camera’s internal temperature is high. If the white
< > icon is displayed, the still photo’s image quality may deteriorate.
If the red <E> icon is displayed, it indicates that the Live View or
movie shooting will soon stop automatically (p.310, 351).
The external flash always fires at full output.
Flash exposure compensation cannot be set
for the external Speedlite.
High-speed sync cannot be set in the <f> mode.
The camera makes a small noise when it is shaken.
The shutter makes two shooting sounds
during Live View shooting.
During Live View or movie shooting, a white or red E
icon is displayed.