Filter
Top Products
193
The four-digit file number is like the frame
number on a roll of film. The captured
images are assigned a sequential file
number from 0001 to 9999 and saved in one folder. You can change
how the file number is assigned.
1
Select [File numbering].
Under the [51] tab, select [File
numbering], then press <0>.
2
Select the file numbering method.
Select the desired setting, then press
<0>.
Continues the file numbering sequence even after the card is
replaced or a new folder is created.
Even after you replace the card, create a folder, or switch the target
card (such as f9g), the file numbering continues in sequence up to
9999 for the images saved. This is convenient when you want to save
images numbered anywhere between 0001 to 9999 on multiple cards or
in multiple folders into one folder on your computer.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images may continue
from the file numbering of the existing images on the card or in the
folder. If you want to use continuous file numbering, it is recommended
that you use a newly-formatted card each time.
3 File Numbering Methods
(Example) BE3B0001.JPG
Continuous
0051 0052
File numbering after
replacing the card
Next sequential file number
100
0051 0052
101
File numbering after
creating a folder
Card A (f)
Card B (g)
Card A