Filter
Top Products
Troubleshooting Guide
506
Check that the correct date and time are set (p.47).
Check the time zone and daylight saving time (p.47-48).
The shooting date and time do not appear in the picture. The date and
time are recorded in the image data as shooting information. When
printing, you can imprint the date and time in the picture, using the
date and time recorded in the shooting information (p.417, 421).
If the number of images recorded on the card exceeds the number the
camera can display, [###] will be displayed (p.373).
In low temperatures, the display speed of the AF points may become
slower due to the AF point display device’s (liquid crystal)
characteristics. The display speed will return to normal at room
temperature.
If the LCD monitor is dirty, use a soft cloth to clean it.
In low or high temperatures, the LCD monitor display may seem slow
or may look black. It will return to normal at room temperature.
[Eye-Fi settings] will appear only when an Eye-Fi card is inserted in
the camera. If the Eye-Fi card has a write-protect switch set to the
LOCK position, you will not be able to check the card’s connection
status or disable Eye-Fi transmission (p.475).
The shooting date and time displayed is incorrect.
The date and time are not in the picture.
[###] is displayed.
In the viewfinder, the AF point display speed is slow.
The LCD monitor does not display a clear image.
[Eye-Fi settings] does not appear.