Filter
Top Products
349
3 Menu Function Settings
[Mirroring]
• The movie is displayed on the LCD monitor and via the HDMI
output simultaneously.
• The HDMI output movie does not show the shooting information,
AF frame, and other details (output without an information
overlay).
If you will leave the camera untouched for more than 30 minutes
during HDMI output, select [No mirroring] and set [52: Auto
power off] to [Disable] (p.69).
If the HDMI movie is output without an information overlay, remaining
card capacity, remaining battery capacity, internal temperature warning
(p.351), and other warnings will not be displayed on the HDMI output
device’s screen. Be especially careful if [No mirroring] is set. If
[Mirroring] is set, you can check for warnings on the camera’s LCD
monitor.
When you are not shooting movies, the power will turn off automatically
after the [52: Auto power off] time elapses. If [Mirroring] is selected
and [52: Auto power off] is set to [Disable
], HDMI output will stop
(movie shooting will stop) if you leave the camera untouched for 30
minutes.
Even when [Mirroring] is set, if you play back an image or display a
menu, the HDMI movie will not be displayed.
Avoid still photo shooting (p.327) while recording the HDMI output to an
external recording device. Some external recording devices may not
synchronize the time code or audio with movie images, or may produce
audio interference, resulting in the movie not being recorded correctly as
intended.
Depending on the viewing environment, the brightness of the movie shot
with the camera may look different from that of the HDMI output movie
recorded to an external recording device.
By pressing the <B> button, you can change the information
displayed.
A time code can be appended to the HDMI output movie (p.341).
The HDMI output will also output sound (except when [Sound
recording] is set to [Off]).