Filter
Top Products
D Using an External Speedlite
260
With an EZ/E/EG/ML/TL-series Speedlite set to A-TTL or TTL
autoflash mode, the flash can be fired at full output only.
Set the camera’s shooting mode to <a> (manual exposure) or
<f> (aperture-priority AE) and adjust the aperture setting before
shooting.
When using a Speedlite that has manual flash mode, shoot in the
manual flash mode.
Sync Speed
The camera can synchronize with non-Canon compact flash units at
1/250 sec. and slower speeds. With large studio flash units, be sure to
test the flash synchronization before shooting with the sync speed set
within approx. 1/60 sec. to 1/30 sec. The flash duration of such units is
longer than that of compact flash units and varies depending on the
model.
PC Terminal
The camera’s PC terminal can be
used with flash units having a sync
cord. The PC terminal is threaded to
prevent inadvertent disconnection.
The camera’s PC terminal has no
polarity. You can connect any sync
cord regardless of its polarity.
Cautions for Live View Shooting
If you use a non-Canon flash unit with Live View shooting, set [z6:
Silent LV shoot.] to [Disable] (p.297). The flash will not fire if it is set to
[Mode 1] or [Mode 2].
Canon Speedlites Other Than the EX-series
Non-Canon Flash Units