Filter
Top Products
k Shooting Movies
318
During movie shooting in the <A>, <d>, <s>, <f>, and <F>
modes, this camera supports the function that turns on the Speedlite’s
LED light automatically in low-light conditions. For detailed
instructions, refer to the EX-series Speedlite’s instruction manual.
Using an EX-series Speedlite (Sold Separately)
Equipped with an LED Light
Notes for <A>, < d>, <s>, <f>, and <F> Modes
In the <A> mode, the scene icon for the scene detected by the camera
is displayed on the upper left of the screen (p.319).
You can lock the exposure (AE lock) by pressing the <A> button
(except in the <A> mode, p.229). The exposure setting will be
displayed for the time length set with [z6: Metering timer]. After
applying AE lock during movie shooting, you can cancel it by pressing
the <S> button. (AE lock setting is retained until you press the <S>
button.)
You can set exposure compensation up to ±3 stops by setting the
<R> switch to the left and turning the <5> dial (except in the
<A> mode).
Pressing the shutter button halfway displays the ISO speed and shutter
speed at the screen bottom. This is the exposure setting for taking a still
photo (p.323). The exposure setting for movie shooting is not displayed.
Note that the exposure setting for movie shooting may differ from that for
still photo shooting.
In the <A>, <d>, and <F> modes, the shutter speed and aperture will
not be recorded in the movie’s Exif information.