Filter
Top Products
3 Menu Function Settings
346
Movie Servo AF tracking sensitivityN
You can change the Movie Servo AF’s
tracking sensitivity to one of five levels.
This affects the responsiveness of AF
tracking sensitivity when the AF point
loses the subject, such as during
panning or when an obstacle enters the
AF points.
This function is available when [Movie
Servo AF] is set to [Enable] and [AF
method] is set to [FlexiZone - Single].
Locked on: -2 / Locked on: -1
This setting makes the camera less inclined to track a different
subject if the AF point loses the original subject. The -2 setting
makes the camera less inclined to track a different subject than the
-1 setting. It is effective when you want to prevent the AF points from
rapidly tracking something that is not the intended subject during
panning or when an obstacle enters the AF points.
Responsive: +2 / Responsive: +1
This makes the camera more responsive when tracking a subject
that covers the AF point. The +2 setting makes the AF point more
responsive than +1. It is effective when you want to keep tracking a
moving subject as its distance from the camera changes, or to
rapidly focus on another subject.
If L8(59.94 fps) or 7(50.00 fps) is set, Movie Servo AF will not
function and therefore the settings above will not be available.
If [AF method] is set to [u+Tracking] or [FlexiZone - Multi], the tracking
sensitivity will be equivalent to the [0] setting.