Filter
Top Products
441
3 Setting Custom FunctionsN
Warnings z in viewfinder
When any of the following functions are set, the <z> icon can be
displayed in the viewfinder and on the LCD panel (p.26-27).
Select the function for which you want the warning icon to appear, and
press <0> to append a <X>. Then select [OK] to register the setting.
When monochrome V is set
If the Picture Style is set to [Monochrome] (p.162), the warning
icon will appear.
When WB is corrected
If white balance correction (p.172) is set, the warning icon will
appear.
When one-touch image quality is set
If you change the image-recording quality with the one-touch
image quality function (p.456), the warning icon will appear.
When M is set
If [z3: High ISO speed NR] is set to [Multi Shot Noise
Reduction] (p.176), the warning icon will appear.
When spot metering is set
If the metering mode is set to [Spot metering] (p.225), the
warning icon will appear.
LV shooting area display
When the aspect ratio for Live View shooting (p.295) is set to [4:3],
[16:9], or [1:1], you can set the display method for the shooting area.
: Masked
: Outlined
When you set any of the checkmarked [X] functions, <z> will also appear
for the respective setting (except when Multi Shot Noise Reduction is set)
on the shooting settings screen (p.60, 469).