Filter
Top Products
83: Custom ControlsN
452
The AF will stop while you hold down the button assigned to this
function. Convenient when you want to stop the AF during AI Servo AF.
After setting and assigning this function to a button, you can apply the
following settings by holding down the assigned button for AF: AF area
selection mode (p.90), Tracking sensitivity (p.113), Acceleration/
deceleration tracking (p.114), AF point auto switching (p.115), Servo 1st
image priority (p.117), and Servo 2nd image priority (p.118). Convenient
when you want to change the AF characteristics during AI Servo AF.
*2:On the setting screen, press the <B> button to
display the detailed settings screen. Turn the <5>
or <6> dial to select the parameter to be
registered, then press <0> to append a
checkmark [X]. When you select a parameter and
press <0>, you can adjust the parameter.
By pressing the <L> button, you can revert the
settings to their defaults.
You can switch the AF operation. In One-Shot AF mode, when you hold
down the button to which this function is assigned, the camera switches
to AI Servo AF mode. In the AI Servo AF mode, the camera switches to
One-Shot AF mode only while you hold down the button. Convenient
when you need to keep switching between One-Shot AF and AI Servo
AF for a subject that keeps moving and stopping.
During metering, when you press the button assigned to this function,
the camera will switch to the registered AF point.
*3:On the setting screen, when you press the <B> button, you can select [Switch
only when btn is held] or [Switch each time btn is pressed]. To register the AF
point, see page 450.
: AF stop
: Switch to registered AF function
: ONE SHOT z AI SERVO
: Switch to registered AF point