Filter
Top Products
271
3 Setting the FlashN
For details on the external Speedlite’s Custom Functions, refer to the
Speedlite’s (sold separately) instruction manual.
1
Select [External flash C.Fn
setting].
2
Set the desired functions.
Select the number, then press <0>.
Select the setting, then press <0>.
1
Select [Clear settings].
2
Select the settings to be cleared.
Select [Clear built-in flash set.],
[Clear external flash set.], or [Clear
ext. flash C.Fn set.], then press
<0>.
On the confirmation dialog, select
[OK]. Then the flash settings or
Custom Function settings will all be
cleared.
External Speedlite Custom Function Settings
Clear Settings
With an EX-series Speedlite, if the [Flash metering mode] Custom
Function is set to [TTL flash metering] (autoflash), the Speedlite will always
fire at full output.
The Speedlite’s Personal Function (P.Fn) cannot be set or canceled with the
camera’s [Flash control] screen. Set it with the Speedlite.