Canon HG10 Camcorder User Manual


 
Additional Information
100
Keep the battery out of the reach of
children. If swallowed, seek medical
assistance immediately. The battery
case may break and the battery fluids
may cause internal damage.
Do not disassemble, heat or immerse
the battery in water to avoid the risk
of explosion.
Built-in Rechargeable Lithium Battery
The camcorder has a built-in
rechargeable lithium battery to keep the
date/time and other settings. The built-
in lithium battery is recharged while you
use the camcorder; however, it will
become totally discharged if you do not
use the camcorder for about 3 months.
To recharge the built-in lithium battery:
Connect the compact power adapter to
the camcorder and leave it connected
for 24 hours with the switch set to
.
Storage
If you do not intend to use the
camcorder for a long time, store it in a
place free of dust, in low humidity, and
at temperatures not higher than 30 °C.
Cleaning
Camcorder Body
Use a soft, dry cloth to clean the
camcorder body. Never use
chemically treated cloths or volatile
solvents such as paint thinner.
Lens, Viewfinder and Instant AF Sensor
If the lens surface or Instant AF
sensor is dirty, the autofocus may not
work properly.
Remove any dust or dirt particles
using a non-aerosol type blower
brush.
Use a clean, soft lens-cleaning cloth
to gently wipe the lens or viewfinder.
Never use tissue paper.
LCD Screen
Clean the LCD screen using a clean,
soft lens-cleaning cloth.
Condensation may form on the
surface of the screen when the
temperature changes suddenly. Wipe
it with a soft dry cloth.
Maintenance/Others
D122_PAL_E.book Page 100 Thursday, July 19, 2007 6:54 PM