Filter
Top Products
Video
54
4 Keep or pressed down to
adjust the focus as necessary.
• You can also use the control dial to
make smaller adjustments.
• Pressing to select [FOCUS]
again will return the camcorder to
autofocus.
5 Press .
• The focus will be locked.
• Pressing and then to select
[FOCUS] again will return the
camcorder to autofocus.
Infinity Focus
Use this function when you wish to
focus on faraway subjects such as
mountains or fireworks.
POINTS TO CHECK
Adjust the zoom before you start the
procedure.
Mode switch: P
1 If the function guide does not
appear on screen, press to
display it.
2 Keep pressed down for more
than 2 seconds.
• appears.
• Pressing to select [FOCUS]
again will return the camcorder to
autofocus.
• If you use the control dial, operate
the zoom or press or ,
changes to “MF” and the camcorder
returns to manual focusing mode.
Automatic Backlight Correction and
Manual Exposure Adjustment
At times, backlit subjects may appear
too dark (underexposed) or subjects
under very strong lights may appear too
bright or glaring (overexposed). To
correct this, you can manually adjust
the exposure or use the automatic
backlight correction.
POINTS TO CHECK
Mode switch: P (except for the
[ FIREWORKS] recording program).
Automatic Backlight Correction
When shooting subjects with a strong
light source behind them, you can have
the camcorder automatically correct for
the backlight with the press of a single
button.
( 21)
( 21)
D122_PAL_E.book Page 54 Thursday, July 19, 2007 6:54 PM