Filter
Top Products
Photos
68
- During auto exposure bracketing.
- In the [ FIREWORKS] recording
program.
• The flash mode cannot be selected
when the exposure is locked.
• We recommend not using the flash while
the optional Wide-converter or
Tele-converter is attached; its shadow
can appear on the screen.
• About the AF-Assist Lamp: While you press
halfway, if the subject is too
dark the assist lamp may light up briefly
in order to enable the camcorder to
focus more accurately (AF-assist lamp).
You can also set [AF AST LAMP] to
[ OFF] so the assist lamp does not
light up ( 43).
- The camcorder may not be able to
focus even if the AF-assist lamp is on.
- The brightness of the AF-assist lamp
could be an inconvenience. Consider
turning it off in public places such as
restaurants.
• The built-in mini video light may be
disabled automatically when you attach
the optional VFL-1 Video Flash Light. To
use the built-in mini video light, set the
switch on the VFL-1 to OFF first.
Continuous Shooting and Exposure
Bracketing (Drive Mode)
Take a series of pictures of a moving
subject or record the same picture in 3
levels of exposure in order to choose
later the picture you like the best.
POINTS TO CHECK
Mode switch: P (except for the
[ FIREWORKS] recording program).
Options
Default value
PHOTO
( 21)
[SINGLE]
Records a single still image.
[ CONT.SHOOT.] (Continuous Shooting),
[ HISPEED CONT.SHOOT. ]
(High-Speed Continuous Shooting)
Captures a series of still images as long as you
hold pressed down. For the number of
frames per second, refer to the sidebar on
page 68.
Maximum number of continuous shots
These figures are approximate and vary with the recording conditions and subjects.
The actual number of frames per second will be lower when the shutter speed is 1/25 or
slower.
Number of frames (shots) per second
Normal speed 2.5 frames
High speed 4.1 frames
Using the flash 1.7 frames
Maximum number of continuous shots
60 images
PHOTO
D122_PAL_E.book Page 68 Thursday, July 19, 2007 6:54 PM