Canon HG10 Camcorder User Manual


 
67
Flash
You can use the built-in flash to record
still images in dark places. The flash
features the red-eye reduction function.
Options
Default value
1 If the function guide does not
appear on screen, press to
display it.
2 Press to select .
If does not appear on the
function guide, repeatedly press
to display it.
Repeatedly press to cycle
between the flash modes.
disappears after 4 seconds.
3 Press , first halfway to
activate the autofocus and then
fully to record the still image.
You can attach the optional VFL-1
Video Flash Light to the advanced
accessory shoe if you want a more
powerful flash than the built-in flash.
The procedure for setting the flash
mode is the same as described above.
For details about attaching and using
the flash, refer to the instruction manual
of the VFL-1. The VFL-1 can also be
used as a video light. When a video
accessory is attached to the advanced
accessory shoe, will appear on the
screen.
NOTES
The practical range of the built-in flash
is approx. 1 to 2 m. The practical range
with the VFL-1 Video Flash Light
attached is approx. 1 to 4 m. In any
case, the actual range will depend on
the recording conditions.
The range of the flash decreases in
continuous shooting mode.
For red-eye reduction to be effective,
the subject needs to look at the assist
lamp. The degree of reduction depends
on the distance and on each individual.
The flash will not fire in the following
cases:
- When you manually adjust the
exposure in (auto) or (red-eye
reduction) mode.
Additional Functions
( 21)
(auto)
The flash fires automatically according to the
brightness of the subject.
(red-eye reduction, auto)
The flash fires automatically according to the
brightness of the subject. The assist lamp lights
up to reduce the red-eye effect.
(flash on)
The flash always fires.
(flash off)
The flash does not fire.
TO USE THE OPTIONAL VFL-1 VIDEO FLASH
LIGHT
PHOTO
D122_PAL_E.book Page 67 Thursday, July 19, 2007 6:54 PM