Canon HG10 Camcorder User Manual


 
17
Recording reminder
The camcorder counts from 1 to 10 seconds
when you start recording. This is helpful to avoid
scenes that are too short.
25F progressive frame rate
Select the 25F progressive frame rate ( 43) to
give your recordings a cinematic look. You can
combine this frame rate with the [ CINE
MODE] recording program ( 48) to enhance
the effect.
Hard disk operation
Record, Record pause,
Playback, Playback pause,
Fast playback,
Fast reverse playback,
Slow playback,
Slow reverse playback
Remaining recording time
When there is no more free space on the hard
disk, “ END” will be displayed and the
recording will stop.
Number of still images available on the
card
flashing in red: No card
in green: 6 or more images
in yellow: 1 to 5 images
in red: No more images can be recorded
• When viewing the still images, the display will
always be in green.
• Depending on the recording conditions, the
number of available still images displayed may
not decrease even after a recording has been
made, or may decrease by 2 still images at
once.
Card access display
is displayed next to the number of images
available while the camcorder is writing on the
memory card.
Remaining battery charge estimate
• When is displayed in red, replace the
battery pack with a fully charged one.
• When you attach an empty battery pack, the
power may turn off without displaying .
• Depending on the conditions under which the
camcorder and the battery pack are used, the
actual battery charge may not be indicated
accurately.
Image number
The image number indicates the name and
location of the file on the memory card. For
example, the file name of image 101-0107 is
“IMG_0107.JPG”, stored under the folder
“DCIM\101CANON”.
D122_PAL_E.book Page 17 Thursday, July 19, 2007 6:54 PM