Filter
Top Products
85
PC Connection Diagram
Transferring Photos - Direct Transfer
With the supplied USB cable and
software (on the DIGITAL VIDEO
Solution Disk CD-ROM) you can
transfer still images to a computer
simply by pressing .
Preparations
The first time you connect the
camcorder to the computer, you need
to install the software and set the auto-
launch setting. From the second time
on, just connect the camcorder to the
computer using the USB cable to
transfer images.
1 Install the supplied Digital Video
Software.
See Installing the Software in the
Digital Video Software instruction
manual (electronic version on PDF
file).
2 Set the camcorder to
mode.
3 Connect the camcorder to the
computer using the USB cable.
Refer to PC Connection Diagram
( 85).
Connecting to a Computer
USB Terminal
Open the LCD panel to access.
Terminal on the
Camcorder
Connecting Cable
Terminal on the
Connected Device
1
Output connection (signal flow ) to a computer or PictBridge-compatible printer with an USB port.
USB Cable
(supplied)
D122_PAL_E.book Page 85 Thursday, July 19, 2007 6:54 PM