Filter
Top Products
External Connections
82
Standard Definition TV Sets
Playback on a TV Screen
This section explains how to play back
scenes taken with this camcorder by
connecting it to a TV.
The quality of the playback picture will
vary depending on the connected TV
and the type of connection used.
POINTS TO CHECK
Change the following settings as
necessary before making the
connections.
- [TV TYPE] to match the output video to
the aspect ratio of the connected TV
( 47).
- [COMP.OUT] to select the output video
specifications when using connection
type ( 47).
- Set [AV/PHONES] to [ AV] when
using connection type or .
Connecting
Connect the camcorder to the TV
following one of the connection
diagrams shown in the previous section
Connection Diagrams ( 81).
Terminal on the
Camcorder
Connecting Cable
Terminal on the
Connected Device
VIDEO
AUDIO
R
L
3
Output connection (signal flow ) to a TV or VCR with AV terminals.
STV-250N Stereo Video Cable
(supplied)
Yellow
White
Red
4
Output connection (signal flow ) to a TV or VCR with SCART terminal.
First, connect a SCART adapter to the SCART terminal on the TV or VCR and then connect the STV-250N
Stereo Video Cable to the adapter.
STV-250N Stereo Video Cable
(supplied)
Yellow
White
Red
SCART adapter
(commercially available)
( 21)
D122_PAL_E.book Page 82 Thursday, July 19, 2007 6:54 PM