Filter
Top Products
Using the PDC-3000 with your PowerMac/PowerPC 145
The optional CompactFlash card reader kit lets you work
with a camera CompactFlash card as if it were an additional
disk drive on your computer. This allows you to enhance,
transfer and erase pictures on the card without connecting the
camera to your computer.
To access a card after you have installed the CompactFlash
card reader hardware and software, remove the card from the
camera and insert it into the reader. Then follow instructions
in Opening a folder above to display the pictures on the card
in the Transfer Pictures window. You can then enhance,
transfer and erase pictures on the card as described in
Working with pictures in the camera (page 120).
If necessary, refer to the instructions with the CompactFlash
card reader for more information.
Working with pictures
on a CompactFlash
card