Filter
Top Products
Setting up 34
If the PDC-3000 camera is the only external SCSI device
being used with your computer, turn off the computer and
the camera. Then connect the SCSI cable provided to the
computer’s SCSI port (a). The port is marked with a SCSI
symbol for easy identification. Connect the other end of the
system cable (b) to the camera’s SCSI connector.
10A.CDR
Use only the SCSI cable provided with the camera. Other
cables may appear similar, but could damage the camera or
your computer. If you are using an Apple PowerBook
computer, read the special instructions on page 36 before
continuing.
After connecting the SCSI cable, connect the camera to AC
power using the power adapter/trickle charger (c).
If the PDC-3000 is the
only SCSI device