Filter
Top Products
Setting up 38
Installing PDC software on your PowerMac/PowerPC
To view PDC-3000 pictures stored in the camera, optimize
and transfer pictures from the camera to your computer,
operate the camera through the computer, or change camera
setup options, you must use one of the following programs
on your PowerMac or PowerPC. Both are provided with the
PDC-3000 camera and are installed during the procedure
described below.
· PDC Plug-in software Using the Plug-in after it is installed
requires an image-processing application (not provided)
compatible with Adobe Photoshop plug-in modules.
· PDC Direct software If you do not have an image-
processing application compatible with Photoshop plug-in
modules, you can use PDC Direct to transfer pictures from
the PDC-3000 to your computer.
To install the PDC software on your PowerMac or PowerPC:
1 Insert the PDC for PowerMac/PowerPC disk or CD-ROM
into an internal or external drive.
2 If the disk contents are not already visible, open the disk.