Filter
Top Products
118 PIXIS System Manual Version 2.C
Acton SP-2150/SP-2750 Adjustable C- to Spectroscopy-Mount
Adapter (Adapter Kit 7050-0107)
Qty P/N Description
1. 1 Adapter Plate
2. 1 2518-1284 1.25”-32 Threaded Insert
Assembly Instructions
1. Make sure that the shipping cover has been removed from the detector port on the
spectrograph.
2. Place the flat side of the adapter plate against the face of the detector.
3. Insert the threaded insert through the center hole in the plate and screw the adapter
into the detector’s C-mount.
4. Rotate the sliding tube as you gently insert it into the spectrograph.
5. Secure the sliding tube with the setscrews.
Note: Adapter parts are machined to provide a tight fit. If you need to remove the sliding
tube from the spectrograph, first loosen the two setscrews that secure it, and then rotate the
tube as you pull it out. If you have removed the sliding tube from the spectrograph, rotate the
sliding tube as you re-insert it, and tighten the setscrews afterwards to secure it. Forcing the
tube into the spectrograph could permanently damage the tube and the spectrograph opening.