Honeywell 800-05056 Security Camera User Manual


 
Operation
Document 800-05056 Rev C 79
11/09
Function Buttons
Disconnect: Disconnects the current connection on the Status View panel.
Note If you want to connect to another site, disconnect from the
currently connected system on the Status View panel first by
clicking .
Remote Setup: Allows changing the setup of the remote DVR connected to the
Status View panel.
Note Refer to the manual for each applicable remote DVR for more
details on system setup.
Remote System Log: Displays the system log information of the remote DVR
connected to the Status View panel.
Remote Event Log: Displays the event log information of the remote DVR
connected to the Status View panel.
Note See Remote Menu, page 50, for more details on the Remote
System Log and Remote Event Log.
Note When the remote site is not connected to the Status View panel,
Remote Setup, Remote System Log and Remote Event Log
menus can be accessed by clicking the right mouse button after
selecting the remote site on the Remote Sites panel.
Remote Panic Control: Controls panic recording of the remote DVR that is
connected in the status view panel. (Panic Recording On) indicates that the
remote DVR is not in the panic recording mode and that you can start panic
recording by clicking the button. (Panic Recording Off) indicates that the
remote DVR is in the panic recording mode and that you can stop recording by
clicking the button.