Filter
Top Products
Map Editor
94
Note Popup Dwell Time will be applied to all maps displayed on the
map panel.
Status Color Setting Select Status Color Setting… in the Option menu and
Figure C-7 appears. You can set the device to display a unique color reflecting its status
on the Map panel.
Figure C-7 Status Color Window
Check the box beside Color Use and select each status box to use. Click each selected
status box and select the desired color. Click OK.
Unplugged: Either connection to the remote site has failed, or the Device
No. for the device is not supported by the site.
Event off: Event detection is not set up.
Irregular: The device is not working properly.
Video Loss: Video loss is detected.
Motion: Motion is detected.
Alarm In: Alarm in is detected.
Alarm Out: Alarm out is detected.
Note Devices are displayed as Irregular based on the system
check settings and as Video Loss, Motion, Alarm In, and Alarm
Out based on the event detection settings on the remote DVR.
Note The device displays mixed colors when detecting more than two
statuses at the same time.