IBM 21Y Security Camera User Manual

126 Netfinity 3500-M20 – Type 8657 Models 21Y, 22Y, 31Y, 32Y,
Power supply
Before you begin:
Read “Safety information” on page 155.
Review the information in “Before you begin” on page
Note: This illustration depicts the server in the upright posi-
tion. It is recommended that the server be placed on
its left side before performing this service procedure.
1 Screws
2 Power supply
To remove the power supply, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the left-side cover (see “Removing the side
cover” on page 44.
4. Turn the server onto its right side so that the open left
side is facing up.
Note: Rotate the feet in toward the server so they do
not detach due to the weight of the server.
5. Remove the support bracket (see “Removing the sup-
port bracket” on page 45) and air baffle.