Filter
Top Products
2. CONTROLS, INDICATORS AND CONNECTORS
30
Ⅲ Alarm Message Display
The following alarm messages are displayed on the status 0 and status 1
screens.
Event display is not made when an alarm message is displayed in alarm
message display 2.
2-10 Indications in Viewfinder (Cont'd)
ACCU- FOCUS
G
F
I
F5.6
STBY 4V21.<60
B
CH1-----+--
CH2-----+--
Alarm message display 1
Alarm message display 2
Indication Contents
CLOSE CASSETTE COVER The cassette cover is not closed.
VTR WARNING [HEAD] Head clogging
VTR WARNING [SERVO] Servo error
1
VTR WARNING [DEW] Condensation
VTR WARNING [HARD] Hardware error
VTR WARNING [STOP] Operation stopped
VTR WARNING [REW] Rewinding abnormality
TAPE NEAR END Remaining tape time is less than about 2 minutes in the record mode
TAPE END Tape end reached
2 REC INHIBITAn unrecordable videocassette (the switch on the back of the cassette is
set to SAVE) is inserted.
NO TAPE VTR trigger is pressed with no tape loaded.
Ⅲ Time/Date Display
When setting DISPLAY item of the TIME DATE menu screen to ON, the time
and date will appear as shown in the diagram on the left. The time and date
are recorded on tape during recording as well.
For the display formats of the time and date, ☞ see page 84.
For setting the time and date, see page 43.
ACCU- FOCUS
G
F
I
F5.6
STBY
REC2
EXT
4V21.>60
B
CH1-----+--
CH2-----+--
2000/06/15
20 :15:15
SD
:213C
Time/date display