Filter
Top Products
12. SETUP MENU
83
128
0
128
–
12-10 SETUP Screen
Item Function, Operation Variation Range Initial Setting
H PHASE
SC COARSE
SC FINE
PAGE BACK
For adjusting the horizontal phase of the unit in relation to the signal
(external sync signal) input through the GENLOCK/AUX IN connector on
the left side of the unit.
Delaying the horizontal phase of the unit in relation to the external sync
signal .
................... Increase the number
Speeding up the horizontal phase of the unit in relation to the external
sync signal .
................... Decrease the number
∗ Adjustment is not possible if the external sync signal is not input. Possible
values are indicated by - - -.
For roughly adjusting the unit’s sub-carrier (SC) phase against signals
(external synchronous signals) inputted to the GENLOCK/AUX IN terminal
on the left side of the unit.
(0°, 90°, 180°, 270°)
∗ Adjustment is not possible if the external sync signal is not input. Possible
values are indicated by - - -.
For fine adjusting the sub-carrier (SC) of the unit in relation to the signal
(external sync signal) input through the GENLOCK/AUX IN connector on
the left side of the unit.
Rotating the sub-carrier clockwise in relation to the external sync signal
................... Increase the number
Rotating the sub-carrier anticlockwise in relation to the external sync signal
................... Decrease the number
∗ Adjustment is not possible if the external sync signal is not input. Possible
values are indicated by - - -.
The CAMERA MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
0
to
255
0
90
180
270
0
to
255
–
26 PIN OUT
CHARACTER
MIX
Other than composite signals, another type of video signals can be
outputted from the VTR/RM multi-pin connector. The other output video
signal is selected here.
Y/C : Outputs Y/C separate signals.
RGB : Outputs RGB signals.
CPN : Outputs component video signals.
For selecting whether to mix characters in the MONITOR OUT video.
OFF : No characters are displayed
ON : Character-mixed display
Y/C
RGB
CPN
OFF
ON
CPN
OFF
SET UP For selecting whether to include setup signals in the camera images,
external input video or VCR playback video signals.
OFF : Setup signals are not included.
ON : Setup signals are included. (Setup level: 7.5%)
OFF
ON
ON