JVC GY-DV550U Camcorder User Manual


 
4. POWER SUPPLY
39
4.
5.
5.
3.
3.
3.
1.
2.
4.
Connect the connectors protruding from the GY-DV550 with
the connectors on the battery holder.
* Following connection of the connectors, insert them into
the connector compartment.
5.
Secure the battery holder to the GY-DV550 with the four
mount screws provided with the battery holder.
* Take care not to pinch the wires. This could result in
damage.
To use an Anton-Bauer battery pack (Propack 13/14, Trimpack 13/14, Magnum 13/14, Compack 13/14 Series), it is necessary to
detach the battery case from the GY-DV550 and replace it with the Anton-Bauer battery holder. Use the following battery holder.
Battery holder: Anton-Bauer QRQ27
Detaching the Battery Case From the GY-DV550 and Attaching The Anton-Bauer Battery
1.
Remove the two black screws A on the battery case.
2.
Remove the lower half of the battery case cover in the
downward direction.
Attaching and Detaching an Anton-Bauer Battery Pack
Attaching the Battery Pack
1.
Align the 3 guide pins of the battery pack with
the guide holes on the battery holder, and push
straight to insert the battery pack.
The battery cannot be attached properly if the
guide pins are not inserted straight.
2.
Slide the battery pack toward the side panel
where the cassette cover is located until it clicks.
Now the battery pack has been attached.
Detaching the Battery Pack
While pushing and holding the release lever, slide
the battery pack toward the side panel where the
LCD display is located, then pull the battery pack
outward to remove.
3.
To remove the battery case, remove the four screws B fixing
the battery case and the connector connecting the battery
case to this unit.
4-2 Battery Pack Operation (Cont'd)
Black screw A
Mount screw
B
LIGHT
ON
OFF
COUNTER
CH-1 CH-2
REAR
FRONT
RM
AUDIO INPUT
MODE
CTL
TC
UB
VTR
ON
OFF
INCOM
MIC
INCOM
MIC
LEVEL
POWER
OFFRM
DC IN
/BATT.
CALL
CARBON
DYNAMIC
Connector
Mount screw B
Guide pins
Battery
pack
(Trimpack)
Release
lever
Cassette cover
side panel
Guide holes
(x3)
Side panel
with display
Battery
Release lever
Anton-Bauer
Battery holder
USING AN ANTON-BAUER BATTERY PACK
Connector
Compartment