Filter
Top Products
8. PLAYBACK MODE
60
• If a tape recorded in the LETTER mode is played back
on a 4:3 aspect ratio monitor TV. Images will be displayed
in the letter box (16:9 aspect ratio) that is split horizontally.
SHUTTERSTATUS
MENU
FILTER
3200k
1
5600k+1/8ND
2
5600k+1/64ND
3
ALARM
MONITOR
OPERATE
NG
GAIN
OUTPUT
WHT.BAL
VTR
ON OFF
AUTO IRIS
LOLUX
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
LIGHT
ON
OFF
COUNTER
AUDIO SELECT
MANUAL
AUTO
CH-1 CH-2 CH-1 CH-2
REAR
FRONT
RM
AUDIO INPUT
MODE
CTL
TC
UB
CH-1
MIX
CH-2
RESET
OPERATE/WARNING
MONITOR
SELECT
CH-1
AUDIO
LEVEL
CH-2
VTR
ON
OFF
INCOM
MIC
INCOM
MIC
LEVEL
POWER
OFFRM
DC IN
/BATT.
CALL
CARBON
DYNAMIC
FULL AUTO BLACK
LOG REW FF
PLAY STILL
STOP
EJECT
1.
OPERATE switch
1.
POWER switch
6.
STOP button
3.
PLAY button
5.
4.
STILL button
2.
EJECT button
2.
1.
Set the POWER switch to DC IN/BATT. and set the
OPERATE switch to ON.
2.
Load the recorded videocassette correctly.
• Slide the EJECT switch to the side. When the cassette
cover opens, insert the videocassette and then close the
cassette cover again.
Ⅲ When a recordable videocassette (with the switch on the
back of the cassette set to REC) is loaded, the unit enters
the record-pause mode (STBY mode).
In this case, press the STOP button to release the record-
pause mode.
3.
Press the PLAY button.
a
The PLAY indicator lights and playback starts.
4.
Press the STILL button to stop playback temporarily.
a The STILL indicator lights and the unit enters the
still mode.
5.
To re-start playback, press the PLAY button.
a The STILL indicator goes out and playback starts
again.
6.
To stop playback, press the STOP button.
a The PLAY indicator goes out and the unit enters
the stop mode.
8-1 Playback Procedure
Operation
• When the still picture mode or stop mode has continued
for about 30 minutes, the unit automatically switches to
the save mode to protect the tape.
The time until the tape protect mode is initiated can be
set to 3 or 30 minutes with the VCR Setup Menu item
No. 307 LONG PAUSE TIME.
When used in a cold environment, the setting will be 3
minutes regardless of the setting on the VCR Setup
Menu.
• Noise may appear in the picture during still mode.
• When the automatic tracking function is activated at the
start of the playback mode, digital noise may appear on
the playback image.
• This unit does not allow manual tracking adjustment.
• When playing back a tape recorded on another unit,
digital noise may appear during playback.
• When turning on the power with the tape inserted or after
loading a tape, the built-in head cleaner will emit a sound
while operating. However, this is not a malfunction of the
unit.
Memo:
CAUTION:
Playback of tape recorded
in LETTER mode
4:3 aspect ratio monitor 16:9 aspect ratio monitor
• When playing back tape recorded in the LETTER or
WIDE mode, 16:9 screen detection ID signal will not be
outputted from the Y/C OUT connector.
• ID signal is also not outputted when inputting WIDE
signals via the DV connector (IEEE1394 signals).