JVC GY-DV550U Camcorder User Manual


 
7. SHOOTING OPERATION
56
1.
In the record-pause or stop mode, approximately 7 seconds of
the last recorded portion can be played back.
The recorded contents can be checked in the viewfinder or
on a monitor connected to the MONITOR OUT or Y/C OUT
connectors.
In the viewfinder or on the monitor connected to the
MONITOR OUT or Y/C OUT connectors, the video image
from the VCR section is output.
1.
In the record-pause or stop mode, press the RET button on
the camera lens section.
The tape is slightly rewound and played back for
approximately 7 seconds.
After playback is finished, the tape returns to the position
at which the RET button is pressed and the record-pause
mode resumes.
When the RET button is kept pressed, the tape is rewound
and played back for approximately 18 seconds at maximum.
While the RET button is pressed, the record-mode is not
entered even if the VTR trigger button is pressed.
7-4
Checking Recorded Contents in Record-Pause Mode (Recording Check Function)
* During recording check, the following indications will
appear if the error rate increases due to head clogging,
etc.
RF appears on the display panel.
HEAD CLOG appears on the counter display.
VTR WARNING (HEAD) appears in the viewfinder.
* Recording check cannot be performed for an external
VCR.
RET button