Filter
Top Products
110
Status Screen
You can enlarge and display only the characters of the status screen on the LCD monitor.
Status Screen in IEEE1394
Input Mode (continued)
Item Description
A Frame Rate/Bit Rate
Displays the frame rate and bit rate in pairs. (60p HQ, 30p HQ, 60i HQ, 60p SP, 30p SP, 60i SP, 50p HQ, 25p
HQ, 50i HQ, 50p SP, 25p SP, 50i SP, 24p HQ, 24p SP, 50i, 60i)
B Resolution
Displays the video image resolution. (1920ן1080, 1440ן1080, 1280ן720, 720ן480, 720ן576)
C Audio Level Meter
Displays the audio level for CH-1 and CH-2.
A mark is displayed when the audio format is not supported in the IEEE1394
mode. (32k, 44.1k)
The positions of -20 dB and -10 dB are displayed as A
oB.
Memo :
● You can turn ON/OFF the display using [Audio Meter] of [Status Display] in the
[LCD/VF] menu. (A Page 91)
D Voltage/Remaining
Battery Power
Displays the current status of the power supply in use.
Display Description
Currently powered by an AC adapter. The current voltage is shown on the right.
If the supplied voltage from the AC adapter is low, the voltage value will be
displayed in red as a warning.
Currently powered by a battery.
When the battery power runs out, the battery mark appears hollow, and ARESB is
displayed.
Memo :
● The display on the right can be set using [Battery Info] of [Status Display] in the
[LCD/VF] menu. (A Page 91)
-20 dB
-10 dB
12.3V
12.3V
200min
30%
RES
Enlarged Status Display on
LCD Monitor
DF
FREE
A
B
123 min
min
OK
1280 x 720
60p HQ
CH1
CH2
STBY
100min
67.8min
STBY REVIEWSTOP REC
DD
A
B
C
D
E F HG
I
J
Item Description
A Audio Level Meter
Displays the audio levels of [CH-1] and [CH-2].
If the reference audio level (A-20dBB or A-12dBB) is exceeded, this is displayed in yellow. The AOverB area is
displayed in red. A48kB is the sampling frequency.
Memo :
● When [Rec Mode] in the [Rec Mode] menu is set to AVariable FrameB, audio cannot be recorded and is
indicated by the mark.
B Framing Mode
Displays the framing mode.
[DF] : Drop frame
[NDF] : Non-drop frame