Filter
Top Products
12
Introduction
Side Control Panel
A
[VF BRIGHT] Viewfinder Luminance Adjustment Knob
(
A
Page 29)
B
[VF PEAKING] Contour Adjustment Knob (
A
Page 29)
Memo :
●
This knob does not function when Focus Assist is activated.
(
A
Page 37)
C
[FOCUS ASSIST] Focus Assist Button
Press this button during shooting to display the focus area in
either blue, red, or green. This enables easy and accurate
focusing. (A Page 37)
D
[USER1], [USER2], [USER3] User Buttons (
A
Page 79)
Use these buttons to switch shooting conditions according to
the object. The functions change as below according to the
operation mode (A Page 8).
Memo :
●
Set the functions of the [USER1,USER2,USER3] buttons in
the menu. (
A
Page 79)
●
When the menu screen is displayed, these buttons function
as the menu operation buttons.
(
A
Page 70 [Operation Buttons])
E
[MENU] Menu Button (
A
Page 70)
F
[ND FILTER] ND Filter Switch (
A
Page 45)
G
[STATUS] Status Screen Display Button
●
Press the [STATUS] button to display the status screen on
the viewfinder and LCD monitor during normal screen
display (when the menu screen is not displayed).
(
A
Page 18 [Status Screen])
●
Switches between [Main Menu] and [Favorites Menu] when
the [STATUS] button is pressed while the menu screen is
displayed. (
A
Page 70)
H
[GAIN] Sensitivity Selection Switch (
A
Page 40)
I
[WHT.BAL.] White Balance Selection Switch (
A
Page 42)
You can select one of the three white balance types.
J
[POWER] Power ON/OFF Switch
Turns ON/OFF the power.
When the power is OFF, APOFFB appears on the LCD
monitor and viewfinder.
Wait for 5 seconds or more to turn on the power again.
K
[REC] Rec Trigger Button (Recording Start/Stop)
Starts/stops recording.
The [REC] trigger button (A Page 11) Z on top and the
[REC] trigger button (A Page 16) of the lens are interlocked
with this button.
Memo :
●
When [1394 Rec Trigger] in the [Others] menu is set to
A
Split
B
, this button becomes the recording start/stop button
of the external equipment. (
A
Page 94)
(
A
Page 124 [Backup Recording])
L
[AUDIO LEVEL CH-1/CH-2]/[AUTO] CH-1/CH-2
Recording Level Adjustment Knob/Auto Indicator
(
A
Page 46)
M
[CANCEL] Cancel Button
Cancels various settings and stops playback.
N
Cross-Shaped Button (
JKH
I
)/Set Button (
R
)
The function changes according to the operation status of
the camera recorder.
Ⅵ During menu operation (all modes) (A Page 70)
Center Set button (
R
) : Confirms menu items and setting
values
Cross-Shaped Button (
JK
) : Selects menu items and setting
values
Ⅵ During Camera mode (Except AUX mode)
Shutter operation:
Center Set button (
R
) : Shutter ON/OFF
Cross-Shaped Button (
JK
) : Switches shutter speed when shutter
is ON
AE level operation : Cross-shaped button (H I)
Names of Parts (continued)
During Camera mode
(Except AUX mode)
During Media mode
[USER1]
Button
●
Activates the function assigned to
[USER1] in the menu.
●
Loads the [TC Preset] screen
when pressed together with the
[MENU] button. (
A
Page 51)
Adds/deletes OK
mark.
(A Page 68)
[USER2]
Button
●
Activates the function assigned to
[USER2] in the menu.
●
Resets settings on the [TC Preset]/
[UB Preset] screen when pressed.
(
A
Page 51, 52)
Deletes clips
(A Page 66)
[USER3]
Button
●
Activates the function assigned to
[USER3] in the menu.
^
A
B
D
E
F
G
I
J
L
M
N
O
P
K
C
H